The TUBE MILL control and the TUBE MILL 100 control represents a unique product innovation – the world’s first batch mill with single-use milling vessels. For the first time, this unit will enable serial testing to be carried out under reproucible, contamination – free conditions.
The single-use milling vessels reduce the cleaning, time and energy that is devoted to the application process. These vessels also prevent cross-contamination of the sample material – a major advantage for quality assurance.
The 40 ml and 100 ml capacity milling vessels and hood are made from transparent material, allowing sample milling to be observed during the process itself. With the Tube Mill 100 control larger grinding chambers with a maximum volume of 100 ml (MT 100) can now be used. For sterile applications you can use the sterile disposable grinding chamber MT 40-10 sterile with a stainless steel beater. It reduces soft, medium, hard and brittle materials with a Mohs hardness of up to 5 (manganese or apatite: 5 Mohs).
The unit is easy to operate thanks to the user-friendly, multilingual OLED display and timer function. The Tube Mill’s versatility is particularly noteworthy. The IKA Tube Mill control can be used to process hard and soft, brittle and dry material. In combination with dry ice, it also allows damp, fatty, elastic and fibrous materials to be milled thoroughly.
The wide speed range of this unit equates to processing times that are less than one minute for most samples. Particular attention was paid to safety in the development of this mill, which only operates if the hood is closed and the milling vessel is connected to the motor and properly secured. If any of these safety features are omitted, an error message is displayed. The milling vessel cannot be opened during the milling process.
Project Manager – Sales & Marketing
814/475, Survey No.129/1 Mysore Road
Kengeri – 560060
Tel: +91 (080) 26253 960
Fax: +91 (080) 26253 901
Email: [email protected]